Home

LexxJet

P/N:05037
Price: $54.25

Kit Specifications:

Skill Level 4: Slightly Challenging

Length: 28.5" (72.4 cm)

Diameter: 2.2" (56 mm)

Weight (without motor): 9.8 oz (278.2 gm)

Recovery Method: 32" (81.3 cm)
plastic parachute

Recommended Motors: See Chart Below




To purchase this kit now, go to: http://www.ApogeeRockets.com/LexxJet.asp

For vendor images click here

Kit features

  • Simulated Jet Engines and Unusual Wings Give the Kit a Unique Look. The kit has several challenging steps, which include cutting jet engine tubes at an angle, and creating wings out of multiple pieces of balsa.

  • Plastic Nose Cone - The smooth plastic nose cone requires no finishing other than a coat of paint. Its 3.46:1 ogive shape is very efficient for high speed rocket flights. The fit of the BT-80 size nose cone is perfect on the standard size body tube. This means you won't have to add tape to increase the friction when inserted into the tube.

  • Colorful pressure-sensitive decals - This is a big reason why is so easy to make this rocket so awesome looking. It is just a matter of applying the sticker-like decals.

  • Laser-cut balsa wood fins - Balsa wood is very lightweight and can be airfoiled by sanding, to reduce the drag forces on the kit. This makes the rocket zoom higher and faster into the sky.

  • Large 1/4 inch Launch Lug - Because this is a bigger model, you'll have a larger lug on the side of the rocket. This is used with mid-power size launch rods, to stabilize the rocket so it doesn't sway in the wind prior to launch.

  • Premium Quality Body Tubes - The tubes are thin-wall to reduce weight, but are pleny strong for this model. The surface is slick and smooth, which makes marking lines on them easy. Painting is also a breeze, since the spirals are tight and require little filling.
  • The large 32" diameter plastic parachute that comes with the kit, brings the rocket down slowly for a nice soft touchdown. The canopy on the parachute is a colorful black and yellow, which is easy to see in the sky, and when it lands on the grass. You'll also find that the chute has tear-proof adhesive rings that reinforce the points on the canopy where the shroud lines attach. These greatly strengthen the parachute canopy, making it practically impossible to damage the parachute. Because this is a big rocket, the parachute is an octagon shape, instead of being a hexigon. Therefore, it has two more suspension lines, meaning it can carry a heavier rocket down to the ground.

  • Die-Cut Cardstock Centering Rings and Bulkheads. We use premium quality cardstock for our centering rings. This saves weight, and allows the rocket to be put together with ordinary water-based wood glue. You won't need any exotic or expensive adhesives to put this kit together.

  • The model also comes with a high-strength, Kevlar® Shock Cord. Kevlar is six times stronger than steel, and is also fire proof. It can easily withstand the high heat of ejection, ensuring the rocket descends as a single piece. This makes for a very durable rocket that can be launched again and again.

  • Spring-steel engine retainer clips allow you to swap out engines between flights in just milli-seconds. It is really that fast!
Dynastar LexxJet Estimated Altitude Predictions (generated using RockSim)
Motor Used
Comments
Altidude - feet (meters)
Motor Type
D12-3
First Flight
377.4 feet (115.04 m)
Single Use
E15-4
Impressive! Lots of Smoke.
1112.2 feet (339.01 m)
Single Use
E30-4
Great For Breezy Winds
1090.3 feet (332.31 m)
Single Use
E18-4
-
1061.4 feet (323.52 m)
Reloadable
E28-7
Good For Breezy Winds
1079.9 feet (329.14 m)
Reloadable
F12-5
Calm Wind Only
1168.3 feet (356.09 m)
Reloadable
F24-7
-
1276.4 feet (389.04 m)
Reloadable
F39-6
-
1313.29 feet (400.29 m)
Reloadable

Most motors listed in this chart are available through Apogee Components.

3355 Fillmore Ridge Heights Colorado Springs, CO 80907
(719) 535-9335